Archive for September, 2011


Graves Motorsports 2011 Kawasaki ZX-10 Exhaust Video

Tuesday, September 20th, 2011

Graves Motorsports video review of the all new Kawasaki ZX10R Full Exhaust System for the 2011 model bikes. Available from

Ohlins TTX High Performance Replacement Springs

Tuesday, September 20th, 2011

Graves Motorsports’ race suspension specialist Kyle overviews the new Graves Ohlins TTX replacement springs. Race Ohlins TTX Rear Replacement Springs. These springs are designed for use with the Ohlins TTX 36 rear shock and replaces the standard Ohlins springs 21040 and 21041 series.**


15% weight savings over comparable full race springs.*
25% weight savings over standard shipping springs *
Designed and tested by Graves for use in racing applications wehre weight savings are of the upmost importance.
Available in “in between” rates not otherwise available from a standard spring.
Priced at nearly half the price of comparable full race spring which is actually still heavier
Designed using the highest quality spring material

Available through Graves Racing Division ( Dimensions: 140 Longx52 ID (OD varies by rate)
90,92.5,95,97.5 and 102.5 Nmm available

** recommended for use with Graves spring collar
* weight savings over comparable rate spring

Dynojet Secondary Fuel Module Install Video on Yamaha R1 by Chuck Graves

Tuesday, September 20th, 2011

Graves Motorsports’ – Shane McCoy and Chuck Graves install a Dynojet Secondary Fuel module on a Yamaha R1 during the 2011 Yamaha / Graves Motorsports Deals Gap Convention. This unit works in conjunction with the Dynojet PC5 and Autotune accessories to allow tuning control over the secondary injectors. This video shows the complete installation and right down to updating the firmware for the PC5. Installation is on a Yamaha R1 – 2009 model (this same parts also works on the 08-11 R6 using a PC5). The parts seen in this video are available from Graves Motorsports –

Zero Gravity Yamaha R1 Windscreen Install Video

Tuesday, September 20th, 2011

Shane McCoy from Graves Motorsports installs a Zero Gravity windscreen on his Yamaha R1. These wind screens improve clarity, wind protection and look great! The install is quick and they are very affordable. Check them out at

Graves Motorsports Yamaha R6 Braking Rotor Installation

Tuesday, September 20th, 2011

Graves Motorsprots crew chief Gary Dean installs a set of braking wave rotors on Josh Herrin’s Yamaha R6 Daytona Sportbike. These are the recommended brake rotor setup by Graves Motorsports. On sale at

Graves Motorsports Daytona Sportbike R6 Build Assembly

Tuesday, September 20th, 2011

Graves Motorsports crew chief Gary Dean is never late for the job! In this episode Gary sleeps in to begin the build of a Graves Motorsports AMA Pro Racing spec Yamaha R6 Daytona Sportbike. Watch as Gary quickly assembles this incredible Yamaha into a world class Graves Yamaha race machine. More details of this exact bike build and available products can be found at

Graves Motorsports Yamaha R6 Suspension Build

Tuesday, September 20th, 2011

Graves Motorsports suspension technician Kyle Guglielmetti taking the standard Ohlins Yamaha R6 front and rear suspension kits and building them to Graves Motorsports spec standards. This is the same suspension kits that can be found on Graves’ Yamaha R6 riders Josh Herrin, Tommy Aquino and Garrett Gerloff’s motorcycles. Kyle leaves no part left untouched on the way to world class level sport bike suspension. For complete details on these motorcycle suspension services, visit .

Graves Motorsports Yamaha R6 Daytona Sportbike Engine Assembly – Part 3

Tuesday, September 20th, 2011

Graves Motorsports is pleased to bring you the 3rd installment of our video series. In videos 1 and 2 we saw Josh Herrin’s crew chief Gary Dean completely disassemble the motorcycle and the engine. In the 3rd video you’ll see Gary assemble a Yamaha R6 Daytona Sportbike engine, putting the Graves’ race machines on the path towards becoming lightning fast and hard to beat!

Graves Motorsports Yamaha R6 Daytona Sportbike Engine Build – Part 2

Tuesday, September 20th, 2011

Graves Motorsports video series part 2, showcasing a Yamaha R6 engine disassembly. This engine is being built by Josh Herrin’s AMA crew chief Gary Dean on the way to becoming a pro level Daytona Sportbike engine. See separate youtube listing in 3D format. Graves Motorsports technically supports the motorcycle racing community and these exact spec Yamaha R6 engines can be found on

Graves Motorsports Yamaha R6 Race Sport Bike Build – Part 1

Tuesday, September 20th, 2011

Graves Motorsports’ crew chief Gary Dean, taking apart a Yamaha R6 from stock to get it ready for Daytona Sportbike bike build. This video is sped up in real time to show the precise dis-assembly of the Yamaha R6 on the way to becoming a world class certified race machine. Part two of this video (the build) coming soon. Check out Graves Motorsports 3D version of this same video on the Graves Motorsports YOUTUBE page- . World class motorcycles from Graves Motorsports