I installed your smog block off plates on my 2005-06 Suzuki GSX-R1000 and now my FI light comes on. What should I do to turn it off?
You will need to use a 20ohm resistor and jump the connector. This will turn off the FI light.
What do the Smog Block Off Plates do?
Graves Motorsports Smog Block Off Plates are designed to seal off the ports on the cylinder head used by the air injection system (a.k.a smog pumps or AIS). Once these are capped off the air injection system can be safely removed. There are two reasons why you want to remove the air injection system from your bike;
1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra “fresh air” in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
Go to the Smog Block Off Plates page by clicking here
